Gamma Roller 160 – 3P / ALPS, CNC Line for angles, flat bars and U channels.

CNC Solution for punching, marking and cutting angles, flat bars and U profiles.

Gamma Roller GR 160 3P, CNC Line for Punching, Marking, and Shearing angles, flat bars and U profiles. Punching Unit up to 6 punches and 6 punches per wing. Wide variety optional peripherals to configure your line to suit your specific needs.
Geka-punzonadora-plegadora-bendicrop60-1

Peripherals Available:

  • Automatic Feeder.
  • Minimal Waste Unit.
  • Material Unloading System.
  • Advanced Software with Nesting and Importing DSTV.
FEATURES GR 160-3P
Minimum L 40x40x4 mm
Maximum L 160x160x16 mm
Minimum Flat Bar 50×5 mm
Maximum Flat Bar 160×16 mm
Minimum U 60×30 mm
Maximum U 120×60 mm
Marking Cassette
Characters 5×10
Number of Punches 6 (3 per wing)
Maximum Diameter 31 mm
Punching Force 800 kN
Shear Station Power 2550 kN
Feeder Speed programable hasta 36 m/min.
  • Capacities based on a material resistance of 45 Kg/mm2.
  • GEKA may change technical specifications, equipment and photographs of models, as well as any other information contained herein.
  • Technical characteristics valid except for typographical errors or omissions.

Gamma Roller 150 3P features.

INPUT CONVEYOR UNIT.
• Servo motor-driven tracking roller.
• Independent encoder.
• Feeder tracks at each end of the line.

PUNCHING UNIT.
• Three different punches per wing.
• Diameters up to 31mm.
• CNC-controlled gauge.
• Hydraulic hold down.

SHEARING UNIT.
• Clean cuts without waste.
• Fast and easy access to blades.

MARKING UNIT.
• 5 references.
• Ten characters per reference 10×6 mm.
• PC-controlled selection by reference.

USER-INTERFACE.
• Windows 10 based PC control.
• Touch screen.
• Remote assistance over the internet.
• USB Port.