codMenu[7829]
GAMMA ROLLER 150/160 - 3P
Geka CNCwww.geka-cnc.com
3
7721
Share

GAMMA ROLLER 150/160 - 3P

Gamma Roller 160 - 3P / ALPS, CNC-controlled punching machine for punching, marking and cutting angle bar for medium and large profiles.

Because of its flexibility, it can process plates and U-profiles and can also produce a wide variety of parts at an unbeatable cost.

geka punzonadora cnc gamma roller 160 alps

 

 

The GR 150 3-P product line is the most complete solution for punching, marking and shearing of angles for medium-sized and large steel profiles. It's sleek design, all-purpose functionality and proven performance, empowers you to execute a greater range of operations and produce a wider variety of pieces. Low cost and high quality, with the added extra of allowing you the flexibility to process flat bar and U-profiles, as well.

As with all our GEKA products, customizing your machines from our wide variety optional peripherals offers specific and timely solutions based on your special requirements.

Peripherals Available

  • AUTOMATED FEEDER
  • MATERIAL UNLOADING SYSTEM
  • 0 WASTE UNIT
  • LINE PRO Software

info
  Flat bars Flat bars Flat bars          Punching Shearing Shearing Shearing 45º

 

c2pl GAUGE TABLE
A B
< 50 mm / 2" 14 mm / 9/16"
51 -100 mm / 2- 3 15/16" 23 mm/ 15/16
101 - 150/160 mm/ 4 - 5 15/16 / 6 5/16" 31 mm/ 1 1/4

 

  GR 150 - 3P GR 160 - 3P
Features   << see in inches
Minimum L 35x35x4 mm 35x35x4 mm
Maximum L 150x150x15 mm 160x160x16 mm
Minimum Flat Bar 50x5 mm 50x5 mm
Maximum Flar Bar 150x15 mm 160x16 mm
Minimum U 60x30 mm 60x30 mm
Maximum U 120x60 mm 120x60 mm
Marking Cassette Cassette
Characters 5x10 size typeface 5x10 size typeface
Nº Punches 6 (3/wing) 6 (3/wing)
Maximum Diameter 31 mm 31 mm
Punching Force 730 kn 730 kn
Shear station tonnage 1900 kn 2500 kn
Feeder Speed Programmable up to 36 m/min.
  GR 150 - 3P GR 160 - 3P
Features   << see in mm
Minimum L 1-1/2 x 1-1/2 x 3/16'' 1-1/2 x 1-1/2 x 3/16''
Maximum L 6 x 6 x 5/8'' 6 x 6 x 5/8''
Minimum Flat Bar 2 x 3/16" 2 x 3/16"
Maximum Flar Bar 6 x 5/8" 6 x 5/8"
Minimum U 2 ¼ x 1¿1/4" 2 ¼ x 1¿1/4"
Maximum U 4 x 2" 4 x 2"
Marking Cassette Cassette
Characters 5x10 size typeface 5x10 size typeface
Nº Punches 6 (3/wing) 6 (3/wing)
Maximum Diameter 1-1/4'' 1-1/4''
Punching Force 80 Tons 80 Tons
Shear station tonnage 215 Tons 280 Tons
Feeder Speed Programmable up to 1400"/min.
INPUT CONVEYOR UNIT
  • Servo motor-driven tracking roller
  • Independent encoder
  • Feeder tracks at each end of the line
PUNCHING UNIT
  • Three different punches per wing
  • Diameters up to 1 1/4"
  • Hydraulic hold down
  • CNC-controlled gauges
MARKING UNIT
  • Five references
  • Ten characters per reference [3/8 x 1/4"]
  • PC-controlled selection by reference
SHEARING UNIT
  • Clean cuts without waste
  • Easy and quick access to blades
USER-INTERFACE
  • Windows-based PC
  • Network connectivity
  • USB ports
  • Graphic interfaces
  • Remote assistance via internet
   

 

Download catalogues

24.9
180
Anchors
High voltage pylons
Telecom Towers
Telecommunication towers
Shipyards
Anchoring elements
Copper plate
Handrails
Metal sheds
Cranes
Dockyards
Catenary
Truck chassis
Excavators
Farm machinery
Metal constructions
Fences and enclosures
Metal constructions
Handrails
Wind energy
Loaders
Tent structures
Stand structures
Metal cabins
Excavators
Metallic constructions
Cranes
Metallic constructions
Mining
Snow plow
Agricultural machinery
Mining carriages
Mine
Oil rig
Urban furniture
Publicity boards
Urban furniture
Snow blower
Solar panels
Shovels
Stand structures
Solar panels
Tent structures
Copper plate
Oil rigs
Trailers
Train pylons
Trailers
High-tension pylons
Truck chassis
Urban furniture
Mining wagons
Urban furniture
Billboard
Windo power
Billboards and fences

  • AUTOMATED FEEDERAUTOMATED FEEDER
    ¿ Profiles up to 40' in length
    ¿ CNC-controlled

  • 0 WASTE UNIT0 WASTE UNIT
    ¿ Waste material optimization device
    ¿ Automatically activated
    ¿ CNC-controlled
    ¿ Material optimization calculator

  • OUTPUT CONVEYOR UNIT & CLASSIFICATION OF MATERIALOUTPUT CONVEYOR UNIT & CLASSIFICATION OF MATERIAL
    ¿ CNC-controlled motorized rollers
    ¿ Automated tilting device for stacking of finished material
    ¿ Profiles up to 40 feet in length
    ¿ Accomodates forking up to 5 subdivisions

  • LINE PRO SoftwareLINE PRO SOFTWARE 
    ¿ Importing of .dxf and .dstv format files
    ¿ Nesting optimizes material use

Copyright © 2015 Maquinaria GEKA S.A. All rights reserved.
Website developed by DMacroWeb using the tool DM Corporative
Social networks
Technical characteristics valid except for typographical errors or omissions.
Geka group, committed to continuous product improvement, may without notice change technical specifications, equipment and photographs of models, as well as any other information contained herein.
Share: Share on Facebook Share on Twitter Share on Google +1 Save into my Del.icio.us favorites Save to My Google Bookmarks Save to My Yahoo! favorites Send to Menéame Share on your website
Learn:
Suscribe to newsletter: