Alfa 500/150 for the CNC Processing of Flat Bars and Angles
Alfa 500/150 is an automatic CNC processing Line for CNC punching, marking and shearing flat bars up to 500mm wide and 20mm thick and Angles up to 150mm x 15mm. It is part of Geka´s flat bars processing range.
This CNC flat bar and angle processing solution can perform automatic tasks such as punching, marking and shearing flat bars and angles. Upgrades from Alfa 500 include a mountable marking unit and a mitre shear cutter. This CNC processing line has a vertical wing punching unit that is unique in the whole Alfa series. This vertical wing punching unit has a single punch and can punch diameters up to 31 mm. It also features a Hydraulic hold-down and a Hydraulic servo valve for its positioning. It also has as a triple-head punching unit for diameters of up to 40 mm for flat-bar and horizontal-wing punching of angles.
Alfa 500/150 Capacities
In the following table you will find the capacities of the Alfa 500/150:
|Flat Bar Size (Min.)||50×5 mm|
|Flat Bar Size (Max.)||500×20 mm|
|Maximum Diameter||40 mm|
|Punching Force||1100 kN|
|Number of characters||40|
|Vertical wing punches||1|
|Maximum Diameter||31 mm|
|Vertical Punching Force||600 kN|
|Angle (Min. Size)||50x50x5 mm|
|Angle (Max. Size)||150x150x15 mm|
- Capacities based on a material resistance of 45 Kg/mm2.
- GEKA may change technical specifications, equipment and photographs of models, as well as any other information contained herein.
- Technical characteristics valid except for typographical errors or omissions.
Optional units available
This CNC processing solution has different options available. You may ask for them to be included in your Alfa 500/150´s equipment when you acquire it. If you want to receive additional information, you can contact Geka.
- Automatic Material Loader.
- Mitre Shearing Unit.
- Marking Unit.
- Line Pro Advance Software.
Alfa 500 / 150 features
The principal features of this machine are:
• 3 different, independently selectable punches.
• Up to 40 mm diameter.
• Hydraulic hold down.
• Servo motor and spindle-driven horizontal positioning along Y-Axis.
VERTICAL-WING PUNCHING UNIT
• Single punch unit.
• Diameters up to 31 mm.
• Hydraulic hold down.
• Hydraulic Servo Valve positioning.
• Flat Bar and Angle cuts.
• Hydraulic clamping guides.
• One Station System for Flat Bar and Angles Shearing.
• Windows 10 based PC control.
• Touch screen.
• Remote assistance over the internet.
• USB Port.